Heavy Metals Reducing MF Unit

2999 INR

Share our products now on

NIRNALTM Heavy Metals Reducing MF unit is a Unique, HI-tech but very user-friendly domestic water purifier. It is an affordable alternative to purifying water. Which removes bacteria, microorganisms, and complete turbidity to produce crystal clear water and also reduces heavy metals like Arsenic & Iron/fluoride from the water.
The replacement period of the said filter is 1-2 Years. However, it can be changed according to the using environment such as Intake water quality, pressure and etc.
-Recommended for Tap Water
-Sediment Filtration (Up to 0.2 microns)
-Reduces water bone microorganisms, Arsenic, Iron, and Harmful Organic substances
-Electric power supply is not required
-No wastage of water
-Capacity up to 20,000 / 2 years (whichever is earlier)


# Advantages How to use
1 Removes Bacteria upto 99.9℅ Gently wash the filter housing and filter candle before using.
2 Removes almost complete turbidity & clear water is produced. Connect the filter inlet pipe to the tap (which is connected to the overhead tank).
3 No electricity needed and no chemicals added The filter outlet pipe is placed into the container or storage tank/vessel.
4 Provision to remove organic substance or coloring material if they are present in the feed. The water flow is shown in the schematic diagram.
5 Almost maintenance-free, expect occasional cleaning of suspended solids deposited on the filter surface which doesn’t take more than 2-3 minutes time.
6 *Heavy Metals MF- Reduces elements like Arsenic& iron/ fluoride or the combination of both as per Customers requirement.

1.1 Initially, allow the first 4-5 liters of water to flow out of the filter.

1.2 When the flow of the water is reduced or the filter is clogged, just use the running Recommended for Tap water and wipe the surface of the membrane softly using a foam/cloth. This will remove superfine solids deposited on the membrane which you would have been otherwise drinking.

Ensure that

a) Don’t use the brush or sharp material to wipe, it may damage the membrane

b) The membrane is not pressed too hard

c) While putting the bowl cover back, ensure that the O ring is placed in the groove provided on top inside of bowl bottom.

1.3  The above product works under standard condition:-

a) Turbidity: <1NTU
b) PH range:6-8
c) Temp(degree) range:5C-35C
d) TDS: less then 500ppm

# Frequently Asked Question
1 Question: What is NIRNAL TM Heavy Metals Micro Filter (MF) unit/assembly ?
Answer: NIRNALTM Heavy Metals MF is a Unique, HI-tech but very user-friendly domestic water
purifier. It is an affordable alternative to purify water. Which removes bacteria, microorganisms
and complete turbidity to produce crystal clear water. Additional the other products reduce
Arsenic & Iron and one more which removes fluoride.
2 Question: On what principal does it work?
Answer: It works on the ultrafiltration membrane technology which removes Bacteria, virus, turbidity & foul odor from water( Additional the other products reduce Arsenic & Iron, and one more removes fluoride)
3 Question: How does it work?
Answer: It has four-stage filtration.
Stage 1: Porous filter candle to remove Dust particles up to 5 microns.
Stage 2: Arsenic, iron, and fluoride removal ultrafiltration unit treatment candle.
Stage 3: Activated Carbon to remove odor and color.
Stage-4: Ultrafiltration with 0.2-micron membrane which removes all Suspended solids, bacteria and viruses
4 Question: Does it require electricity?
Answer: No. NIRNALMTM Heavy Metals MF works without electricity. It is a 0.2-micron ultrafiltration, and it only requires water hydrostatic pressure between 10psi to 30psi. (Water head should be a minimum of 15 feet above the water purifier).
5 Question: Is it a very complicated system?
Answer: In fact, it is the most simple water purifier you have ever used.
6 Question: Why is it better than UV system?
Answer: UV is ultraviolet light that covers a specific wavelength of the light spectrum, and it is about 85-87% effective at its absolute best level of performance when new, with a steady and measurable decline over time. It never kills bacteria but just inactivates them. Effectiveness depends on parameters like lamp capacity, rate of flow, wavelength etc. it is electricity-dependent and expensive. It needs costly maintenance contracts.
7 Question: What is the difference between RO system and NIRNALTM Heavy Metals Micro Filter?
Answer: RO removes even the finest radicals/ions making water dead. The minerals in the water, which are useful, are filtered out, unlike NIRNAL SPECIAL Heavy Metals Micro Filter. Very high initial capital cost. It has a high-capacity pump leading to high running costs. 60-70% input water is wasted and gets clogged easily with such elements like Arsenic & Iron/ fluoride. Frequent replacement requirement of expensive cartridges. High AMC charged by the supplier.
8 Question: What is the life of NIRNALTM Heavy Metals MF?
Answer: Life of membrane is approx 2 years. It only requires occasional surface cleaning with
wet, soft cloth. The membrane can be replaced at home very easily; it makes NIRNAL TM  Heavy
Metals MF maintenance-free water purifier.
9 Question: Does it purify salty water?
Answer: No it does not purify salty water.
11 Question: Where it can be used?
Answer: It can be used at every place where there is a requirement of pure water. It can be used at hospital, homes, schools, offices etc.

Additional Information:
Weight – 2 Kg
Dimensions – 14x25x31.5 cm

Additional information

Weight 1.5 kg
Dimensions 36 × 24 × 42 cm
Scroll to top